Checklist for Window Graphics Before Fitters Arrive
What you need to do before fitters arrive
Vinyl Revolution is here to install your window graphics quickly and professionally. This checklist makes this possible and ensures the longest possible lifespan for your graphics. Please read it carefully and provide any necessary details.
CONFIRM YOU HAVE DONE THE FOLLOWING BEFORE YOUR FITTING:
Allocate a parking spot
Easy parking means faster installation. If parking is not available on site, notify Vinyl Revolution and recommend alternative parking if possible.
Assign someone to let fitters in and provide a contact number
Make sure someone can let the fitting team in and show them to the relevant areas for installing graphics.
Take accurate dimensions
If you are getting a full window cover, ensure we have accurate dimensions for the height and width of your window.
Tell us about fittings
Are there any window fittings (light bulbs, displayed items, cables etc) that we need to be aware of? Please remove any fittings you can before our fitters arrive.
Clean installation areas
Wiping dust off surfaces will greatly improve the lifespan of your graphics. Minimise the amount of dust in the air for the best possible result. Clear the area where work is to be carried out, so that all installation areas are accessible.
Notify us if any fitting areas are over 2.5m in height
Fitting graphics in high areas can be dangerous. We need to know in advance so we can hire adequate ladders or platforms to reach these areas.
Ensure there is a electrical socket we can use
A long-lasting and professional install requires the use of heat guns. Please ensure a mains power source is available in the fitting area. Our fitters will have extension cables if needed.
Give at least 24 hours notice if anything changes or any of the above is not possible.
Vinyl Revolution reserves the right to hold you liable for your invoice if our fitters arrive on site with the graphics and you have not taken the steps required to prepare.